Table of Contents
Advertisement
Panel Indicators and Connectors – Rear Panel
Rear Panel
The rear panel contains one switch and a large number of connectors. See photograph below.
Power In Jack
The Reference 3000 derives all its power from a +24 V DC supply connected to the Power In jack on the
lower right side of the rear panel. The input current is less than 5 A.
The Reference 3000's AC Adapter is rated for operation from 100 to 240 V AC, 47 to 63 Hz.
It should therefore be useful throughout the world.
We recommend that you always use the power adapter (power brick) supplied with your Reference 3000 to
power to the instrument.
Input power from the power adapter comes from your AC power mains.
58
Advertisement
Table of Contents
