Appendix C: Misc. I/O Connector - Gamry Instruments Reference 3000 Operator's Manual

Appendix C: Misc. I/O Connector

This connector contains a number of signals; it connects the Reference 3000 to external apparatus. It is the
miniature 15-pin female D-shaped connector on the rear panel of the Reference 3000.
Caution:
ground. The metal shell of the D-connector is connected to the Reference 3000's Floating Ground.
Improper Misc. I/O connections can damage a Reference 3000 that is connected to a high-energy cell
containing earth-grounded terminals.
The auxiliary analog output, derived from a D/A converter, is on this connector. The scaling is normally 1 mV
per bit, for a range of 0to4.096 V full-scale.
The pin-out table for this connector is shown in Table C-1.
Misc. I/O Connector
The ground pins on this connector are not the Reference 3000 floating
93