Ecolab DG1-III-DLA-PCB Operating Instructions Manual page 133

Materials
Device
Water connection
Housing
System isolation
System isolation
Safety device
Safety installations
Type plate
The type plate of the DG1-III is attached both to the rear wall of the inner
housing (pos. 1) and to the left side of the housing box (pos. 2).
Fig. 7: Nameplate positions
EPDM version
G ½ with conical compression fitting NW 10
(for CU or VA pipe, stainless steel flexible hose)
two-piece, removable bonnet, stainless steel material
DIN EN 1717 pipe interrupter type DB
n Flow monitor for monitoring the product flow
n Suction lance with empty level indicator:
(Reserve message or empty message)
n Water flow monitoring
n Solenoid valve monitoring
1
2
61
Technical data
MAN049250 Rev. 1-01.2021