Engine Oil Life Reset - Chrysler 300c Owner's Manual

20_LX_OM_ENA_GCC_t.book Page 73
For the Trip and Fuel Economy menus:
Information is reset by pushing and holding

the OK button.
NOTE:
Performance Timers can also be reset by
pushing and holding the OK button. Refer to
"Performance Pages — If Equipped" in "" for
further information.

Engine Oil Life Reset

Oil Change Required
Your vehicle is equipped with an engine oil
change indicator system. The "Oil Change
Required" message will display in the instru-
ment cluster display for five seconds after a
single chime has sounded, to indicate the next
scheduled oil change interval. The engine oil
change indicator system is duty cycle based,
which means the engine oil change interval may
fluctuate, dependent upon your personal
driving style.
Unless reset, this message will continue to
display each time you place the ignition in the
ON/RUN position. To turn off the message
temporarily, push and release the OK or arrow
buttons. To reset the oil change indicator
system (after performing the scheduled mainte-
nance), refer to the following procedure.
Vehicles Equipped With Keyless Enter-N-Go —
Ignition
Use the steering wheel instrument cluster
display controls for the following procedure(s):
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not start
the engine).
2. Push and release the down arrow button
to scroll downward through the main menu
to "Vehicle Info."
3. Push and release the right arrow button
to access the "Oil Life" screen.
4. Push and hold the OK button to reset oil life.
If conditions are met, the gauge and
numeric display will update to show 100%.
If conditions are not met a popup message
of "To reset oil life engine must be off with
ignition in run" will be displayed (for five
seconds), and the user will remain at the Oil
Life screen.
GETTING TO KNOW YOUR INSTRUMENT PANEL
5. Push and release the up or down
arrow button to exit the submenu screen.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not start
the engine).
2. Fully press the accelerator pedal, slowly,
three times within ten seconds.
3. Without pushing the brake pedal, push the
ENGINE START/STOP button once to return
the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this
procedure.
73
3