Chrysler 300C Touring 2009 Specification

Note: Information shown is based on data available at time of publication (September 1, 2009).
Specifications are valid for Europe and may vary in other international markets. Vehicle model availability
may change per individual markets.
Chrysler 300C Touring

SPECIFICATIONS

Dimensions are in millimeters (inches) unless otherwise noted.
GENERAL INFORMATION
Body Style
Assembly Plant
Vehicle Segment
ENGINE: 3.0-LITER COMMON-RAIL DIESEL (CRD) DOHC 24-VALVE V-6
Availability
Type and Description
Displacement
Bore x Stroke
Valve System
Fuel Injection
Construction
Compression Ratio
Power
Torque
Max. Engine Speed
Fuel Requirement
Oil Capacity
Coolant Capacity
Emission Controls
Emission Class
Fuel Consumption
Urban Cycle
Ex-urban Cycle
Combined Cycle
CO2 Emissions
Information is current as of September 1, 2009
Five-door touring
Magna Steyer, Graz, Austria
E-Segment
Optional on 300C Sedan
72-degree, liquid-cooled, turbocharged
2987 cu. cm (182 cu. in.)
83 x 92 mm (3.27 x 3.62)
Chain-driven DOHC, 24-valve with hydraulic end-pivot roller rockers
Direct injection, sequential with pilot, return type
Aluminum-alloy block and bedplate, aluminum-alloy heads,
balance shaft
18.0:1
160 kW (218 hp DIN) @ 3800 rpm (72.6 hp DIN/L)
510 N•m (375 lb.-ft.) @ 1600 – 2800 rpm
4500 rpm (electronically limited)
49 cetane diesel, DIN EN590
9.5 L (10 qt.) with dry filter
13.2 L (14.0 qt.)
Oxy-catalyst, Diesel-particulate Filter (DPF), Lamba sensors, DPF
temperature and differential pressure sensor, cooled Exhaust-gas
Recirculation (EGR) and internal engine features
Euro IV
10.9 L/100 km
6.8 L/100 km
8.3 L/100 km
220 g/km
5
300C TOURING
www.media.chrysler.com