Gear Shift Indicator (Gsi) - If Equipped; Instrument Cluster Display Selectable Menu Items - Chrysler 300c Owner's Manual

20_LX_OM_ENA_GCC_t.book Page 74
74 GETTING TO KNOW YOUR INSTRUMENT PANEL
Gear Shift Indicator (GSI) — If Equipped
Gear Shift Indicator (GSI) Location
The Gear Shift Indicator (GSI) system is enabled
when the automatic transmission is in manual
shift mode. The GSI provides the driver with a
visual indication, (+ or -) beside the current
gear, within the instrument cluster display when
the recommended gear shift point has been
reached. This indication notifies the driver that
changing gears will allow a reduction in fuel
consumption.
NOTE:
The Performance Shift Indicator (PSI) is config-
ured and turned on or off through the touch-
screen. Refer to "Race Options" in "" for further
information.
Instrument Cluster Display Selectable Menu
Items
Push and release the up or down
button until the desired Selectable Menu item is
displayed in the instrument cluster display.
Follow the Menu or submenu prompts as
desired.
Speedometer
Push and release the OK button to toggle
between mph and km/h.
Vehicle Info
The Vehicle Info consists of the following
submenu (pushing the left or right
button will allow you to scroll through the
submenu):
Tire Pressure Monitor

Coolant Temperature

Transmission Temperature

Oil Temperature

Oil Pressure

Oil Life

Battery Voltage

AWD Status — If Equipped

Intake Air Temperature

arrow
Engine Torque

Engine Power

Performance
WARNING!
Measurement of vehicle statistics with the
Performance Features is intended for
off-highway or track use only and should not
be done on any public roadways. It is
recommended that these features be used in
a controlled environment and within the limits
arrow
of the law. The capabilities of the vehicle as
measured by the performance pages must
never be exploited in a reckless or dangerous
manner, which can jeopardize the user's
safety or the safety of others. Only a safe,
attentive, and skillful driver can prevent
accidents.
Push and release the up
button until the Performance menu is displayed
in the instrument cluster display. Push the right
or left arrow button to enter the
submenus.
or down arrow