Chrysler 300C SRT8 2009 Specification

Note: Information shown is based on data available at time of publication (September 1, 2009).
Specifications are valid for Europe and may vary in other international markets. Vehicle model availability
may change per individual markets.
Chrysler 300C SRT8

SPECIFICATIONS

Dimensions are in millimeters (inches) unless otherwise noted.
GENERAL INFORMATION
Body Style
Assembly Plant
Vehicle Segment
ENGINE: 6.1-LITER HEMI
Availability
Type and Description
Displacement
Bore x Stroke
Valve System
Fuel Injection
Construction
Compression Ratio
Power
Torque
Max. Engine Speed
Fuel Requirement
Oil Capacity
Coolant Capacity
Emission Controls
Emission Class
Fuel Consumption
Urban Cycle
Ex-urban Cycle
Combined Cycle
Information is current as of September 1, 2009
®
Four-door sedan
Magna Steyer, Graz, Austria
E-Segment
®
V-8
Standard
90-degree V-type, liquid-cooled
6063 cu. cm (370 cu. in.)
103.0 x 90.9 (4.06 x 3.58)
Pushrod-operated overhead valves, 16 valves,
16 conventional hydraulic lifters, all with roller followers
Sequential, multi-port, electronic, returnless
Deep-skirt cast-iron block with cross-bolted main bearing caps,
aluminum alloy heads with hemispherical combustion chambers
10.3:1
317 kW (431 hp DIN) @ 6000 rpm (70.6 hp DIN/L)
569 N•m (420 lb.-ft.) @ 4600 rpm
6200 rpm (electronically limited)
95 RON unleaded petrol
6.6 L (7 qt.)
13.25 L (14 qt.)
Close-coupled 3-way catalyst with closed loop fuel control
Euro IV
21.0 L/100 km
9.9 L/100 km
14.0 L/100 km
4
®
300C SRT8
www.media.chrysler.com