Outside Mirrors; Driver's Outside Automatic Dimming Mirror - If Equipped; Outside Mirrors With Turn Signal And Approach Lighting - If Equipped; Power Mirrors - Chrysler 300c Owner's Manual

20_LX_OM_ENA_GCC_t.book Page 36
36 GETTING TO KNOW YOUR VEHICLE

Outside Mirrors

To receive maximum benefit, adjust the outside
mirror(s) to center on the adjacent lane of traffic
and a slight overlap of the view obtained from
the inside mirror.
NOTE:
The passenger side convex outside mirror will
give a much wider view to the rear, and espe-
cially of the lane next to your vehicle.
WARNING!
Vehicles and other objects seen in an outside
convex mirror will look smaller and farther
away than they really are. Relying too much on
side convex mirrors could cause you to collide
with another vehicle or other object. Use your
inside mirror when judging the size or distance
of a vehicle seen in a side convex mirror.
Driver's Outside Automatic Dimming Mirror
— If Equipped
The driver's outside mirror will automatically
adjust for glare from vehicles behind you. This
feature is controlled by the inside automatic
dimming mirror and will automatically adjust for
headlight glare when the inside mirror adjusts.
Outside Mirrors With Turn Signal And
Approach Lighting — If Equipped
Driver and passenger outside mirrors with turn
signal and approach lighting contain four LEDs,
which are located in the upper outer corner of
each mirror.
Three of the LEDs are turn signal indicators,
which flash with the corresponding turn signal
lights in the front and rear of the vehicle.
Turning on the Hazard Warning flashers will also
activate these LEDs.
The fourth LED supplies illuminated entry
lighting, which turns on in both mirrors when
you use the remote keyless entry key fob or
open any door. This LED shines outward to illu-
minate the front and rear door handles. It also
shines downward to illuminate the area in front
of the doors.
The illuminated entry lighting fades to off after
about 30 seconds or it will fade to off immedi-
ately once the ignition is placed into the ON/
RUN position.
NOTE:
The approach lighting will not function when the
gear selector is moved out of the PARK position.

Power Mirrors

The power mirror controls are located on the
driver's door trim panel.
Power Mirror Control
1 — Mirror Selection
2 — Mirror Direction Control
The power mirror controls consist of mirror
select buttons and a four-way mirror control
switch. To adjust a mirror, push either the L
(left) or R (right) button to select the mirror that
you want to adjust.
NOTE:
A light in the select button will illuminate indi-
cating the mirror is activated and can be
adjusted.