In The Case Of Longer Periods Of Non-Use - Sentiotec A2 Instructions For Installation And Use Manual

3 Operation
2. Input the desired preselected time- with the plus/minus buttons 7, e.g. [02:30]. The heating will be triggered
in 2 hours and 30 minutes.
in the display 4
elapsed, dependent on the type of device, 00.00 or the measured temperature in the range of the temperature
sensor is displayed in the display 4
knob 6.
5.1 Press START / STOP button 8
control light 3 switches off. The control unit is ready to input a preselected time or for a restart.
5.2 Press ON/OFF button 2. The sauna control unit is switched off.
TIP:
The time required for the heating to reach the set temperature varies dependent on sauna size and heater
design.
TIP:
temperature in the lounging area.
4

In the case of longer periods of non-use

WE DO IT FIRST.
Instructions for use for the user
8
P. 11/16
EN