The Speed Value Is Incorrect - Technogym spin trainer Maintenance Manual

6.3.

THE SPEED VALUE IS INCORRECT

Replace the display CPU
board: see paragraph 7.4.
Follow the procedure step by step to correctly diagnose the problem. Take particular care with the
checks highlighted by circled numbers, which are described in detail below:
Page 6.8
SPIN TRAINER: Service & Maintenance Manual - rev. 2.0
THE KM/H VALUE
IS INCORRECT
Is the RPM wire of cable
SP-5 correctly connected to
the alternator?
YES
Is the RPM signal output
correctly by the alternator?
YES
Is the RPM signal on connector
CN2 of the alternator interface
board correct?
YES
Is the RPM signal on
connector CN1 of the
alternator interface board
correct?
YES
YES
Is the RPM signal on
connector CN1 of the CPU
board correct?
1
NO
Rewire the cable
correctly
2
NO
Replace the alternator:
see paragraph 7.13.
3
NO
Replace/reconnect cable
SP-5 which connects
the alternator to the
interface board
4
NO
Replace the alternator
interface board: see
paragraph 7.10.
5
Replace cable SP-1
NO
which connects the CPU
board to the alternator
interface board