Scheduled Maintenance - Technogym spin trainer Maintenance Manual

SPIN TRAINER: Service & Maintenance Manual - rev. 2.0

10. SCHEDULED MAINTENANCE

To keep the machine in perfect working order, carry out the scheduled maintenance operations
specified in the table below:
MACHINE EXTERIOR
MACHINE INTERIOR
REAR RUNNER BARS
REAR ROLLERS
These operations must be carried out with the machine turned off and the mains lead
unplugged from the wall outlet.
The scheduled maintenance operations are described below:
(A) EXTERNAL CLEANING
Carry out every week. For this operation, use only a mild detergent. Be careful never to spray
the product directly onto the machine: use it to moisten a cloth.
(B) INTERNAL CLEANING
Carry out every month. Open the chain guards (see paragraph 7.8. ), remove the footboard
(see paragraph 7.9. and use a vacuum cleaner or compressed air to thoroughly clean the
interior, taking special care with the alternator and the electronic circuit boards.
(C) LUBRICATION OF REAR RUNNER BARS
Carry out once a year. Open the rear guard (see paragraph 7.8. ), remove the rear hub
supporting frame (see paragraph 7.14. ) and clean the two vertical runner bars and the bushings
inside the disassembled support frame using a cloth moistened with alcohol. Finally, lubricate
using generic grease (lithium grease recommended).
(D) CLEANING THE REAR ROLLERS
Carry out every month. Open the rear guard (see paragraph 7.8. ) and clean the rear roller(s) to
remove the rubber residue left by the tire, rubbing with a cloth moistened with alcohol and
non-abrasive chemical products. Carry out more frequently if the wear on the tire leaves a
quantity of residue which can impair pedaling.
CLEANING
weekly
(A)
monthly
(B)
monthly
(D)
LUBRICATION
yearly
(C)
Page 10.1