Cleaning The Pump And Accessories - CADD Legacy Plus 6500 Operator's Manual

Cleaning the Pump and Accessories

CAUTION:
• Do not immerse the pump in cleaning fluid or water. Do not allow
solution to soak into the pump, accumulate on the keypad, or enter
the battery compartment. Moisture build-up inside the pump may
damage the pump.
• Do not clean the pump with acetone, other plastic solvents, or abra-
sive cleaners, as damage to the pump may occur.
Routinely clean the pump to keep it free of dirt, liquids, and foreign
objects.
Use any of the following solutions to clean the pump and accessories:
• Soap solution
• Benzalkonium Chloride concentrate (0.13%)
• Glutaral Concentrate, USP (2%)
• 10 % solution of household bleach (one part household bleach to
9 parts water)
• Alcohol, USP (93%)
• Isopropyl Alcohol, USP (99%)
• Chlorohexidine (70%)
• PDI — Super Sani-Cloth®
• Mada Medical — MadaCide
1. Dampen a soft, lint-free cloth with cleaning solution and wipe the
exterior surface of the pump. Do not allow the solution to soak
into the pump.
2. Wipe the entire surface dry with another soft, lint-free cloth. Allow
the pump to dry completely before use.
Section 5: Reference