CADD Legacy Plus 6500 Operator's Manual page 48

Section 2: Pump Setup and Programming
3. To seat the tubing into the groove, gently pull the tubing, until it is
under the retention nubs and flat in the groove.
Retenton
4. Connect the tubing to the patient's infusion set or indwelling
catheter.
WARNING: Ensure that the entire fluid path is free of all air
bubbles before connecting to the patient to prevent air embo-
lism. Air embolism could result in death or serious injury to the
patient.
NOTE: If the fluid path contains an air eliminating filter, it is ac-
ceptable for air bubbles to be present on the vent side of the filter.

nubs