Using serial port diagnostic tools
Restarting services
Introduction
This section describes how to restart the services for COM 1 or COM 2 after
invoking the TSTSERIO local loopback tests.
Service to restart after COM 1 testing
Remote Access Server
Services to restart after COM 2 testing
CallPilot SLEE Service
CallPilot MWI Service
CallPilot Access Protocol Emulator
CallPilot Blue Call Router
CallPilot Call Channel Router
CallPilot Time Service
Remote Access Server
Net Start command
Use the NET START command to restart a specified service on a serial port.
The syntax for the NET START command is as follows:
net start "[ service-name ]"
82
Standard 1.0
CallPilot