Bios Settings - Nortel CallPilot 703t Installation And Configuration Manual

October 2003

BIOS settings

Introduction
This section identifies the 703t server's BIOS settings:
Main (below)
Advanced (see page 279)
Security (see page 280)
Server (see page 281)
Boot (see page 282)
See "To configure the BIOS," on page 285 for instructions on how to verify
that the 703t server settings are set to the values given in the following
sections.
Main
Options
System Time
System Date
Floppy A:
Hard Disk
Pre-Delay
Primary IDE
Master
Primary IDE
Slave
Part 5: 703t Server Maintenance and Diagnostics
Working with the CallPilot server BIOS
Settings
Set for the current time.
Set for the current date.
1.44/1.25 Mbytes, 3.5 inch
Disabled
CD-ROM
None
277