Main Unit Setup - BALDR B0389WST2H2-V1 User Manual

● Auto synchronization: after power on both units, the receiving status
will last for max 3 minutes, the receiving antenna signal will flash, if
no signal received in 3 minutes, the antenna signal will disappear
and stop receiving outdoor signal.
●If the main unit is out of 3 minutes' signal receiving window, you need
to press and hold the "

MAIN UNIT SETUP

When power on or reset, LCD will full display for 3 seconds with "BI"
sound.
Time Time
Display Display
(EU (US
version) version)
24hr 12hr
RF Signal receiving
After power on, it will start receiving outdoor sensor's signal for 3
minutes. If all 3 channels signal received within 3 minutes or receiving
window ends, you can start manual settings.
Manual Settings
After signal received, please follow bellow steps for manual setting.
Press and hold "
skip setting steps or go to the next setting option.
*Tips: press and hold "
value by 8 steps.
1. Press "
SET/MEM
to select 12hr or 24hr.
2. Press "
SET/MEM
value.
3. Press "
SET/MEM
the value.
4. Press "
SET/MEM
value.
/CH
Date
Date Format
Display (EU
version)
2021
D/M
.01.01
" button to enter into setting, press "
SET/MEM
" or "
/CH
" to select time display mode. Press "
"to select Hours. Press "
" to select Minutes. Press "
"to select Year. Press "
'' button to enter signal receiving again.
Date
Temper
Format
ature
(US
Unit
version)
℃(EU
version)
M/D
/℉（US
version)
" button will quickly change the
/AUTODIM
" or "
/CH
/CH
" or "
/CH
10
Weather Langu
Forecast age
ENG(US
Sunny to version)
cloudy /GER(EU
version)
SET/MEM
" or "
/CH
" button to adjust the
/AUTODIM
" or " " button to adjust
/AUTODIM
" button to adjust the
/AUTODIM
Key
Tone
ON
"button to
" button
/AUTODIM