POWER ON 1.Main Unit Installation AC Hole Step1, Peel off the protecting Step 2,Plug the AC Adaptor mask of main unit. to a powered outlet. Step 3, Remove the built in cell battery insulation strip. 2.Sensor Installation Switch to CH1 Switch to CH2 Switch to CH3 Step 2, Load the 2xAA batteries...
NOTE: If not powered on within 3 minutes Press and hold “CH” button for 3 from main unit powered on seconds to search RF signal again. MAIN UNIT SETUP 1.After Power On After 3 seconds, the LCD will LCD will full display for 3 seconds with “BI”...
Page 4
2.RF Signal Searching 3.RF Signal Received Automatically display, The receiving antenna and the antenna signal will flash signal will stop flash. hPa mb hPa mb Outdoor datas 4.RCC Radio Signal Receiving Automatically RCC Radio Signal Searching for 7 Minutes Antenna Signal hPa mb The antenna symbol is flashing.
Page 5
No RCC Radio Signal Received Press and hold “▲/RCC ” The antenna symbol button for 3 seconds will disappear to search RCC radio signal again hPa mb Manual setup SETUP ORDER Weekday Hours Minutes Language Year Month&Date Month display format Date Barometer ●...
Page 6
This Qucik Start is to help you quickly set up the product. For detailed settings, please refer to the user manual, or scan the QR code below for relevant product information and operation video link.Thank you. www.baldr.com :baldrservice@baldr.com :1-833-381-5659...
Need help?
Do you have a question about the B0359WST4H4PR and is the answer not in the manual?
Questions and answers