Comfort Level Indicator - BALDR B0389WST2H2-V1 User Manual

Humidity
1. After power on ,the indoor humidity will display automatically, it will
update reading each 30 seconds and start to receive outdoor signal
which lasts for max 3 minutes.
2. Humidity display range: 1%-99%;for humidity lower than 1%,the
reading will be "1%";for humidity higher than 99%, the reading will
be "99%".
3. Accuracy: For humidity between 40%-80%, the accuracy is ±5%, if
out of this range the accuracy will be ±8%.
4. Arrow indication for humidity changes:
will display when the reading increase by 3% RH within one hour
or compared with last reading.
will display when the reading decrease by 3% RH within one hour
or compared with last reading.
5.Humidity resolution:1% .
Remark: The reading will be more accurate standing still for half an hour
after power on

COMFORT LEVEL INDICATOR

DISPLAY
HUMIDITY
TEMPERATURE
RF RE-REGISTRATION
Press and hold the "
receiving signal again.
TEMPERATURE ALERT FUNCTION
SET OUTDOOR TEMPERATURE ALERT
1.In alert checking mode, press and hold "
outdoor temperature alert value ; the setting data will be flashing in
1Hz.
DRY
1%- 39%
NA
" button to clear all sensors data and start
/CH
14
COMFORT
40%-70%
20℃-28℃
" button to enter into
ALARM
WET
71%-99%
NA