Snooze Function - BALDR B0389WST2H2-V1 User Manual

ALARM FUNCTION
Alarm Time Setting
1.Press and hold "
2.Press " " or "
/CH
" " button will quickly change the value by 8 steps.
/AUTODIM
3.The setting order is: Hour → Minute→ Exit.
4.Press " " button to skip setting steps or go to the next setting option.
ALARM
5.During setting, touch top button to save and exit setting.
6.During setting, if no operation for 20 seconds, it will automatically save
and exit setting.
7.The alarm is default ON after setting the alarm time. Alarm symbol
will display on screen.
Alarm ON/OFF Setting
1. When in time display mode, press "
Press " " button twice to turn ON/OFF alarm by the ON/OFF of
ALARM
symbol .
2. When in alarm time display mode, press "
alarm by the ON/OFF of symbol
3.If no operation for 5 seconds, it will automatically save and exit setting.

SNOOZE FUNCTION

1. When the alarm is ringing, press any other button except top button
to stop the alarm. And the alarm will restart next day.
2. Or when alarm is ringing, press the top button to activate "
function. The alarm will ring again in 5 minutes snooze interval. And
the symbol will be flashing on screen to indicate the snooze mode.
Press any other button except top button to exit the snooze mode. And
the alarm will restart next day.
3. When alarm rings, the ascending "Bibi" alarm sound will last for 2
minutes if no operation.
" button to enter into alarm time setting.
ALARM
" button to adjust data; press and hold "
/AUTODIM
12
" button to check alarm time.
ALARM
" button to turn on/off the
ALARM
.
" or
/CH
"