Advertisement
www.insigniarange.com
Last Modified: 07/01/2019
Before we start, here's our 4 top tips which may assist you...
TIP 1—Building Your Shower
This product is suitable for a DIY build, providing you are confident in your DIY abilities. Please look through this build guide and decide
on whether you feel confident in undertaking this task. If you are not, seek the services of a professional and show them these
instructions before hiring.
TIP 2—Hard Water
Due to the nature of this product we highly advise the purchase and fitting of a water softener.
(Please note: limescale build up may cause damage to your shower and will not be covered under warranty)
TIP 3—Installation
These showers are designed to be free standing and movable from their location should you have the need to replace anything.
ALWAYS USE
Flexible braided water inlet pipes (not supplied) at least a metre long (not central heating plastic type!)
NEVER FIX
with rigid pipes,
NEVER FIX
the unit to the wall or floor.
TIP 4—Sealing
When using Insignia's RubberGum, please ensure the product does not come in contact with your silicone as this will cause the
RubberGum to fail and will not adhere as intended. Rubbergum is immediately waterproof and will gain additional strength over time.
04
Advertisement
