Advertisement
1.
Steam Outlet: Connect the white insulated hose to the tri-jet steam system within your shower as shown in image
are only attached for transportation reasons only.
2.
Water Inlet: Connect a braided hose (not supplied) from the shower valve's centre feed to this opening.
3.
Drain: Connect the grey rubber hose from the steam generators drain opening to the nozzle on the shower waste as shown in image
Jubilee clip (AMI01) found in your screw pack Ensure you drill out the spigot to allow the steam generator water to drain in to the waste.
A
1
2
3
www.insigniarange.com
Steam Generator Connections
The steam generator has 3 connections.
White Insulated Pipe
Tri-Jet Steam Outlet
A.
Make sure these are fitted in the correct position as they
NOTE: MUST DRILL OUT
Last Modified: 07/01/2019
B.
Secure in place with the use of the
B
33
Advertisement
