Download Print this page
Insignia KY004 Series Installation Manual
Insignia KY004 Series Installation Manual

Insignia KY004 Series Installation Manual

Infrared sauna

Advertisement

Quick Links

www.insigniashowers.com
Last Modified: 03/10/2023
INSTALLATION MANUAL
KY004 Infrared
Sauna Series
30 Day Technical Support:
Call 01908 317512 and request technical support for aiding your
installation.
Replacements Parts:
Inside of your warranty period visit:
https://www.insigniashowers.com, click support and make a
warranty claim.
Spares/Replacements Parts:
Outside of your warranty period visit
https://www.insigniashowers.com/replacement-parts.html
ATTENTION INSTALLERS:
These instructions must be
left with the customer
CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!

Advertisement

loading

Summary of Contents for Insignia KY004 Series

  • Page 1 www.insigniashowers.com Last Modified: 03/10/2023 INSTALLATION MANUAL KY004 Infrared Sauna Series 30 Day Technical Support: Call 01908 317512 and request technical support for aiding your installation. Replacements Parts: Inside of your warranty period visit: https://www.insigniashowers.com, click support and make a warranty claim. Spares/Replacements Parts: Outside of your warranty period visit https://www.insigniashowers.com/replacement-parts.html...
  • Page 2 www.insigniashowers.com Last Modified: 03/10/2023 Contents Thank you for your purchase Front Panels Install Electrical & Tool requirements Roof Install Door Cushioning Strip Install Box contents Roof Cover Install Screw Pack Contents Door Handles Install Sauna Left Panel and Back Panel Install Door Magnet Brackets Install Bench Heater Install Securing the Electrics...
  • Page 3 Last Modified: 03/10/2023 Thank you for your recent purchase of an Insignia Sauna. Please read this booklet with great care to ensure you get the best out of your build and have a Sauna that will last for many years to come! Like everything, in order to obtain a first class product that will serve you well for many years, the effort and correctness put into the assembly will reflect in the quality of your finish.
  • Page 4 www.insigniashowers.com Last Modified: 03/10/2023 Electrical Requirements Model KS004 Tools Required Voltage Rating 220-240AC • Scissors Frequency Rating 50Hz • Knife Power Rating 1715 Watts Sauna • Spirit Level Total Amperage 19.24 amps • Tape Measure Always consult a qualified Electrician before connection as to suitability •...
  • Page 5 Bench Top Seat Door Handle Floor Insert VERY IMPORTANT Have you got everything? If not please contact the Insignia directly on 01908 317 512. Remember NEVER book your tradesman until everything has arrived, been checked and is present. No replacement/missing parts can be obtained free of charge during or after the build.
  • Page 6 M 45mm Bolts Wire Fixers Nuts and Washers VERY IMPORTANT Have you got everything? If not please contact the Insignia directly on 01908 317 512. Remember NEVER book your tradesman until everything has arrived, been checked and is present. No replacement/missing parts can be obtained free of charge during or after the build.
  • Page 7 www.insigniashowers.com Last Modified: 03/10/2023 Step 1 — Installing the Back and Left Panels Place the left and back panel in line and hook the clip onto the knob and secure by pushing down the lever.
  • Page 8 www.insigniashowers.com Last Modified: 03/10/2023 Step 2 — Installing the Floor Place the floor of the sauna in line with the fitted back and left panel.
  • Page 9 www.insigniashowers.com Last Modified: 03/10/2023 Step 3 — Installing the Bench Front Panel Slot the bench front panel between the grooves and fit into place.
  • Page 10 www.insigniashowers.com Last Modified: 03/10/2023 Step 4 — Connecting the Heater Wires Once the bench panel is in place, locate the splitter cable in the screw bag & connect the heater wires as shown in the dia- gram. Attach the earth cable on the pre fitted nut & bolt.
  • Page 11 www.insigniashowers.com Last Modified: 03/10/2023 Step 5 — Installing the Bench Seat Slide the bench top between the grooves and push till se- cure against the back and left panels.
  • Page 12 www.insigniashowers.com Last Modified: 03/10/2023 Step 6 — Installing the Right Panel Repeat step 1 with the right panel.
  • Page 13 www.insigniashowers.com Last Modified: 03/10/2023 Step 7 — Installing the Door Panel Place the door panel in line with the latches and secure with locking the latches.
  • Page 14 www.insigniashowers.com Last Modified: 03/10/2023 Step 8 — Installing the Door Handles 2 x M45mm 2 x Nuts and Washers Connect the front piece and the first part of the back piece for the inside of the door, and tighten using the nuts. Connect the second part of the back piece and secure using the M 45 screws.
  • Page 15 www.insigniashowers.com Last Modified: 03/10/2023 Step 9 — Installing the Roof Carefully place the roof into the remaining space making sure it is resting on all sides of the fitted ledges.
  • Page 16 www.insigniashowers.com Last Modified: 03/10/2023 Step 10 — Connecting the Electrics Connect the wires of the main power, con- trol box, temperature control and ozone.
  • Page 17 www.insigniashowers.com Last Modified: 03/10/2023 Step 11 — Installing the Roof 8 x ST 50mm Secure the roof by screwing in the ST 50mm screws.
  • Page 18 www.insigniashowers.com Last Modified: 03/10/2023 Step 12 — Installing the Door Cushioning Strip 5 x ST 12mm Use the rubber bands to secure the wires to the roof using the ST 12mm screws.
  • Page 19 www.insigniashowers.com Last Modified: 03/10/2023 Step 12 — Electrical Connections 1. Main Power Supply 2. Group A : Connections for back and leg heater 3. Group B : Connections for front and side heater 4. Temperature Detector Wire 5. USB Input 6.
  • Page 20 www.insigniashowers.com Last Modified: 03/10/2023 Sauna Control Panel Instructions Button 1/2 (+/- Temp) Cycle through desired temperature setting (max 60°C) Button 3/4 (+/- Time) Cycle through desired time setting (max 99 mins) Button 5/6 (Sauna Heaters) Press to activate Sauna heaters. Pressing once will put the heaters on at 100%. Twice = 90%. Three times = 80%. Four times = 70% and five times = Off.
  • Page 21 www.insigniashowers.com Last Modified: 03/10/2023 Remote Control Instructions...
  • Page 22 www.insigniashowers.com Last Modified: 03/10/2023 Sauna Usage & Safety Guide Never leave children unattended in the Sauna. Regulate the temperature of sauna before session - Pre-heat time 15-30 minutes (from room temperature 20c) Never touch the heater panels whilst in operation, possible burning may occur. Recommended time of use 15-20 minutes per session Stay hydrated during each sauna session.
  • Page 23 (EEE) have to fulfil certain obligations. Under the WEEE directive Insignia is considered the producer of certain products we supply and in line with the demands of the legislation we are pleased to offer the op- portunity to return these products to us for treatment and recycling.
  • Page 24 www.insigniashowers.com Last Modified: 03/10/2023...