Page 1
www.insigniashowers.com Last Modified: 20/12/2023 INSTALLATION MANUAL KYS1450 Shower/Sauna Series 30 Day Technical Support: Call 01908 317512 and request technical support for aiding your installation. Replacements Parts: Inside of your warranty period visit: https://www.insigniashowers.com, click support and make a warranty claim. Spares/Replacements Parts: Outside of your warranty period visit https://www.insigniashowers.com/replacement-parts.html...
www.insigniashowers.com Last Modified: 20/12/2023 Contents Thank you for your purchase Electrical & Tool requirements Box contents Levelling the Tray Connecting the Column and Glass Panel Brackets Installing the Column Installing the Right Back Panel Installing the Right Side Panel Installing the Left Back Panel and Side Panel Installing the Front Fixed Panels Installing the Roof Installing the Door...
Last Modified: 20/12/2023 Thank you for your recent purchase of an Insignia Sauna. Please read this booklet with great care to ensure you get the best out of your build and have a Sauna that will last for many years to come! Like everything, in order to obtain a first class product that will serve you well for many years, the effort and correctness put into the assembly will reflect in the quality of your finish.
VERY IMPORTANT Back Glass Panel Have you got everything? If not please contact the Front Fixed Glass Panel Insignia directly on 01908 317 512. Remember NEVER book your tradesman until everything has arrived, Side Panel been checked and is present. No replacement/missing...
www.insigniashowers.com Last Modified: 20/12/2023 Step 1 — Levelling the tray Level the tray by using a spirit level and then changing the elevation of the legs by screwing clockwise or counter-clockwise.
www.insigniashowers.com Last Modified: 20/12/2023 Step 2 — Connecting the column and glass panel brackets Take the glass brackets and connect to the tray, with the screw tightening connection facing inside the tray. Locate the pre drilled holes for connection. Repeat for all brackets. Then take the 90 degree ‘L’...
www.insigniashowers.com Last Modified: 20/12/2023 Step 3 — Installing the Column Take the rubber seal without holes and place on the tray. Slot the column into position, ensuring you connect all power cables as you align the column. Once aligned, screw the column to the ‘L’ bracket.
www.insigniashowers.com Last Modified: 20/12/2023 Step 4 — Installing the right back panel Ensure you place a seal along the bottom of the glass panel first. Then simply slot the glass panel into the bracket and secure in place with the bolt.
Page 10
www.insigniashowers.com Last Modified: 20/12/2023 Step 5 — Installing the right back panel continued Between ALL glass and aluminium framework connections, place a ribbed rubber seal tightly to protect the glass and secure in position Along the corner of the glass, place the 90 degree aluminium framework connector, angled to allow the side panel to be inserted along the right hand side of the shower.
www.insigniashowers.com Last Modified: 20/12/2023 Step 6 — Installing the right side panel Ensure you place a seal along the bottom of the glass panel first. Then simply slot the glass panel into the bracket and secure in place with the bolt.
www.insigniashowers.com Last Modified: 20/12/2023 Step 7 — Installing the left back panel and side panel Repeat the process from the previous pages. Ensure you place a seal along the bottom of the glass panel first. Then simply slot the glass panel into the bracket and secure in place with the bolt.
www.insigniashowers.com Last Modified: 20/12/2023 Step 8 — Installing the front fixed glass Repeat the process from the previous pages. Ensure you place a seal along the bottom of the glass panel first. Then simply slot the glass panel into the bracket and secure in place with the bolt.
www.insigniashowers.com Last Modified: 20/12/2023 Step 9 — Installing the roof Foam strip x1 Place Foam Strip around the roof to protect the glass Bolt kit x14 Bolt kit order = Cap, Bolt, Spacer, Washer, Glass Protector, Washer, Nut. Connect the roof to all panels.
www.insigniashowers.com Last Modified: 20/12/2023 Step 10 — Installing the door handle and door hinges Use the Allen key provided to take the hinge apart. Use glass protecting spacer either side of the glass and connect the bolts from the inside of the shower. Use the Allen key provided to take the door handle apart.
Page 16
www.insigniashowers.com Last Modified: 20/12/2023 Step 11 — Installing the door Push the fixed glass seal onto the fixed glass. Lift the door into position and hold steady whilst connecting the hinges. To align, slacken off the hinge slightly, adjust the door position and then re- tighten.
www.insigniashowers.com Last Modified: 20/12/2023 Step 12 — Installing the sauna heaters Install all heater brackets with the hook on the inside of the shower, ALWAYS facing upwards. Also use the round glass protectors over each bolt. The heater covers simply slot on and clip into position.
www.insigniashowers.com Last Modified: 20/12/2023 Step 13 — Installing the Accessories Using the accessories connection bolts, screw the accessories in position and secure from the rear using washers and nuts.
Page 19
www.insigniashowers.com Last Modified: 20/12/2023 Step 14 — Installing the stools Using the Allen key provided, screw the legs to the stools and place in the shower.
www.insigniashowers.com Last Modified: 20/12/2023 Steam Control Panel Instructions Button 1 (Steam) Press to activate the steam function. Press again to turn the steam function off. Button 2 (Time/Temp) Press to display temp, then cycle through desired temperature setting (max 60°C) using up and down arrows (Buttons 5/11).
www.insigniashowers.com Last Modified: 20/12/2023 Steam Room/Sauna Usage & Safety Guide Never leave children unattended in the Sauna/Steam Shower. Regulate (if preferred) the temperature of sauna before session - Pre-heat time 15-30 minutes (from room temperature 20c) Never touch the heater panels whilst in operation, possible burning may occur. Recommended time of use is a maximum of 15 mins initially.
(EEE) have to fulfil certain obligations. Under the WEEE directive Insignia is considered the producer of certain products we supply and in line with the demands of the legislation we are pleased to offer the op- portunity to return these products to us for treatment and recycling.
Page 25
www.insigniashowers.com Last Modified: 20/12/2023...