Memory Backup Power; Repackaging Instructions - Sony Tektronix AWG2021 Service Manual

Memory Backup Power

Repackaging Instructions

AWG2021 Service Manual
A lithium battery maintains internal nonvolatile memory, allowing the
AWG2021 to retain waveform and sequence files if AC power is lost. This
battery has a shelf life of about three years. Partial or total loss of stored
information at power-on may indicate that the battery needs to be replaced.
WARNING. To avoid risk of fire or explosion, replace the AWG2021 battery with
a lithium battery having the part number listed in section 10, Mechanical Parts
List. This battery is a safety-controlled part.
To avoid risk of fire or explosion, do not recharge, rapidly discharge, or
disassemble the battery; and do not incinerate the battery or heat it above
100° C. Also, dispose of used batteries promptly. Small quantities of used
batteries can be disposed of in normal refuse. Keep lithium batteries away from
children.
Use a corrugated cardboard shipping carton having a test strength of at least
275 pounds and with an inside dimension at least six inches greater than the
AWG2021 dimensions. (If available, use the original shipping carton, which
meets these requirements.)
If the AWG2021 is shipped to a Tektronix Service Center, enclose the following
information:
H The owner's address
H Name and phone number of a contact person
H Type and serial number of the AWG2021
H Reason for returning
H A complete description of the service required
Seal the shipping carton with an industrial stapler or strapping tape.
Mark the address of the Tektronix Service Center and your own return address on
the shipping carton in two prominent locations.
Preparation for Use
2-7