Nominal Traits; Table 1-1: Electrical Characteristics - Sony Tektronix AWG2021 Service Manual

Performance Characteristics

Nominal Traits

Table 1-1: Electrical Characteristics

Characteristics
Operating Modes
Continuous
Triggered
Gated
Burst
Waveform Advance
Autostep
Arbitrary Waveforms
Waveform Memory
Memory Length
Waveform
Marker1
Marker2
Waveform
Sequence Memory
Scan Counter
Burst Counter
1-4
This section contains a collection of tables that list the various nominal traits
that describe the AWG2021 Arbitrary Waveform Generator. Electrical and
mechanical traits are included.
Nominal traits are described not by equipment performance and limits but by
such things as memory capacity.
Description
Generates the waveform continuously.
Output quiescent until triggered by an external, GPIB or
manual trigger; then generates a waveform or sequence only
one time.
Same as triggered mode except periods are output for the
duration of the gated signal.
Output quiescent until triggered by an external, GPIB or
manual trigger; then generates a waveform or sequence
predefined count.
Continuously generates the waveform in the predefined
(edited) sequence and the next trigger advances the waveform.
Outputs the first waveform in the predefined Autostep File
once. The next trigger advances to output the next waveform
once and so on, for each successive trigger.
256K × 12 bits
256K × 1 bit
256K × 1 bit
64 to 256K in multiple of 8 data points
8K, 32 bits/word
1 to 64 K (16 bits)
1 to 64 K (16 bits)
Performance Test
Check Cont Mode, page
4-12.
Check Triggered Mode, page
4-14.
Check Gated Mode, page
4-18.
Check Burst Mode, page
4-16.
Check Waveform Advance
Mode, page 4-21.
Check Autostep Mode, page
4-23
AWG2021 Service Manual