Ttl Digital Data Out Check (Option 04); Figure 4-21: Ttl Digital Data Out Initial Test Hookup - Sony Tektronix AWG2021 Service Manual

TTL DIGITAL DATA OUT Check (Option 04)

AWG 2021 Rear Panel
TTL Digital Data
Out Cable

Figure 4-21: TTL Digital Data Out Initial Test Hookup

AWG2021 Service Manual
This procedure checks the AWG2021 TTL DIGITAL DATA OUT at the rear
panel.
NOTE. This check requires that the AWG2021 has Option 04 installed.
Electrical
Auxiliary Output, TTL DIGITAL DATA OUT, Level, on page 1-11.
Characteristic
Checked
Equipment One TTL Digital data out cable
Required
One 2 × 13 header
One probe
One oscilloscope
Prerequisites The AWG2021 meets the prerequisites listed on page 4-7. Option 04
(TTL digital data output) must be installed in the AWG2021.
1. Install test hookup and set test equipment controls:
a. Hook up termination board: Connect a digital data output cable to the
AWG2021 rear-pane CH1 DIGITAL DATA OUT output (see Fig-
ure 4–21).
2 × 13 Header
Performance Tests
Oscilloscope
4-51