Maxwell AutoAnchor 560 V2 Owner's Manual page 25

Safety Override
Press any button on the AutoAnchor to stop the windlass during automatic release or
retrieval. In an emergency shut off the power to the windlass using the isolating/
breaker switch.
Enable Automatic Operation
To Set A Rode to be Released Value
Turn the AutoAnchor on.
Clear the safety lock.
To disable the automatic operation: Set the rode to be released
value to Off.
Deploy the Anchor Using Automatic Operation
Turn the AutoAnchor on.
Clear the safety lock.
displays the current length for Auto release.
If this setting is correct. Press and release the down button to
deploy the anchor.
To Change the setting:
Enter the value.
The windlass will stop and the AutoAnchor will beep when
the preset length of rode has been released. The screen
Retrieve the Anchor Using Automatic Operation
Turn the AutoAnchor on.
Clear the safety lock.
Press and release the Up button to retrieve the anchor.
The windlass will stop and the AutoAnchor will beep when the
docking distance is reached. The screen will display
Press the Up button to complete retrieval of the anchor.
The AutoAnchor will beep during this process.
Ensure the anchor is fully docked and secured before moving the boat.