Maxwell AutoAnchor 560 V2 Owner's Manual page 13

2.4 VOLTAGE LEVELS
Minimum Voltage Required
operation.
If the windlass is already operating, this is the
2.5 WIRING
CABLE SPECIFICATIONS
All battery and motor cables must be ring type, insulated to prevent short circuits and
Total Length
Cable from AA560 to the Power Supply and Solenoids
Cable from Motor Load Wires
windlass outputs as these will prevent the system from operating correctly.
All main power conductors and terminations are to be installed according to the windlass
terminals.
To reduce th
and antennas or radar antennas.
12V DC System
.
Cable Size
tied in place with cable ties.
24V DC System