Use Preset - Maxwell AutoAnchor 560 V2 Owner's Manual

3.7.1 Selecting Use Preset
further settings.
to the start screen.
3.7.2 Chain per Turn for Rope and Chain Rode
This is the length of chain that is released during one complete turn of the chainwheel.
3.7.3 To Enter the Chain per Turn
Enter the measurement in mm or metric feet
table for metric inch calculations.
3.7.4 Rope per Turn for Rope and Chain Rode
See instructions below to calculate the rope per turn.
3.7.5 Calculating the Rope Per Turn
Step 1 Carefully release the chainwheel so that it can be
turned by hand to feed the rode out until you have
rope.
Step 2 As you did for the chain, use adhesive tape to mark
instructions for the chain per turn above).
Step 3 Using the mark on the chainwheel as a guide, pull the
rope out by hand until the chainwheel has completed
Step 4
Step 5