Prescanning An Image - Brother DCP-1400 Owner's Manual

PreScanning an Image

PreScanning allows you to scan an image quickly at a low resolution. A
thumbnail version of the image will appear in the Scanning Area. This is only
a preview of the image so you can see how it will look. The PreScan button is
used to preview an image for cropping any unwanted portions from the image.
When you are satisfied with the preview, select the Start button to scan the
image.
1
Insert document face up in the ADF, or face down on the scanner glass.
2
Click the PreScan button:
The entire document will be scanned into the PC and will appear in the Scanning
Area of the Scanner window.
3
To crop a portion of the document to be scanned, drag any side or corner of the
dotted outline in the Scanning Area with the left mouse button. Adjust the dotted
outline until it surrounds only the portion of the document you wish to scan.
4
Place the original face up in the ADF again, if you used the ADF in Step 1.
5
Adjust the settings for Resolution, Color Type (scan type), Brightness, Contrast,
and Size in the Scanner Setup window, as needed.
6
Select the Start button.
This time only the selected area of the document will appear in the PaperPort
window.
7
In the PaperPort
menu and the Crop option in the Options pull-down menu to refine the image.
10 - 7
USING SCANSOFT
®
window, use the options available in the Markups pull-down
™ ®
PAPERPORT FOR BROTHER AND SCANSOFT
You can crop
the prescanned
image
™ ®
TEXTBRIDGE (FOR WINDOWS
®
®
ONLY)