Installing The Remote Printer Console - Brother DCP-1400 Owner's Manual

Installing the Remote Printer Console

Before you install the program, make sure you have the following hardware and
software to install the program:
DOS
Monitor
Option
Follow these steps to install the remote printer console program:
1
Make sure your Brother DCP is connected to your computer and is set to Online.
2
Start your computer and go to the DOS prompt. If you are in Windows
and return to the DOS prompt.
3
Insert the Brother CD-ROM into your CD-ROM drive.
4
At the DOS prompt (C:\>) type x: (Substitute the drive letter of your CD-ROM
drive for "x"), and then press Enter.
C:\>x:
5
Type CD DOS, and then press Enter.
x:\>CD DOS
6
Type RPCSETUP, and then press Enter.
x:\DOS>RPCSETUP
7
Follow the instructions in the installer.
6 - 2
F O R D O S U S E R S
Version 3.3 or later
EGA/VGA or compatible
Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
®
, exit