Inserting Originals For Copying; Using The Adf (Automatic Document Feeder) - Brother DCP-1400 Owner's Manual

Inserting Originals for Copying

You can copy from either the ADF (Automatic Document Feeder) or from the
scanner glass.

Using the ADF (Automatic Document Feeder)

The automatic document feeder (ADF) can hold up to 50 pages, feeding each
one individually through the machine. Use standard (20 lb/75g/m2) paper when
using the ADF. Always fan the pages well and stagger them.
Temperature: 68°F – 86°F (20°C – 30°C)
Humidity:
Paper:
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples, paper
clips, paste or tape attached. DO NOT use cardboard, newspaper, or fabric. (To
copy or scan this kind of document, see
I
Make sure originals written with ink are completely dry.
I
Originals must be from 5.8 to
8.5 inches wide, and from 5 to
14 inches long.
1 Insert original face up, top
edge first.
2 Adjust the paper guides to fit
the width of your pages.
3 Stagger multiple pages. Then
place them in the ADF, until
you feel the first page lightly
touch the feed roller.
4 Pull up the document stopper.
1 - 4
G E T T I N G T O K N O W Y O U R D I G I T A L C O P I E R / P R I N T E R
50% – 70%
Xerox 4200 (20LB/LTR),
Xerox 4024 (24LB/LTR)
Original
is Face Up
in the ADF
Using the Scanner Glass
Stagger the Pages
, page 1-5.)
Document
Stopper