Changing Default Copy Settings; Copy Mode (Type Of Original) - Brother DCP-1400 Owner's Manual

Changing Default Copy Settings

Press Menu/Set, 2 to change default settings for Copy mode. These settings
will remain until you change them again by pressing Menu/Set. Adjust the
Copy Mode and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press
Menu/Set to save your selection. Press Stop—OR—Press
next setting you want to change.
Press Menu/Set, and 2.
1.COPY MODE
2.CONTRAST
3.PAPER TYPE

Copy Mode (Type of Original)

You can select the Copy Mode for your type of original. The default setting is
AUTO , which is used for originals that contain both text and photographs.
is used for originals containing only text.
1
Press Menu/Set, 2, 1.
2
Press
or
original (AUTO,
then press Menu/Set.
3
Press Stop.
to scroll through the options for each setting. Press
or
AUTO
TEXT
PHOTO
-
THIN
PLAIN
THICK
THICKER
to choose the type of
TEXT or PHOTO), and
+
PHOTO is used for copying photographs.
1.COPY MODE
M A K I N G C O P I E S
to select the
is default
TEXT
5 - 9