Brother DCP-1400 Owner's Manual page 127

Caution
I
Wait to unpack the toner cartridge until immediately before you install it in the
DCP. If a toner cartridge is left unpacked for a long period of time, the toner life
is shortened.
I
You can use only a genuine Brother toner cartridge (TN-430 or TN-460), which
is specially formulated to ensure top print quality. Using another brand of toner
cartridge may void your DCP's warranty. Warranty coverage does not apply to
problems caused by the use of 3rd party Toner, 3rd party Toner Cartridge or 3rd
party Drum unit.
4
Gently rock the toner cartidge from side
to side five or six times to distribute the
toner evenly inside the cartridge.
5
Remove the protective cover.
6
Insert the new toner cartridge in the
drum unit until it clicks into place.
7
Clean the primary corona
wire inside the drum unit by
gently sliding the blue tab
from right to left several
times. Return the blue tab to
the Home position ( )
before reinstalling the drum
unit assembly.
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
Toner Cartridge
Corona Wire
Home Position (
Drum Unit
Tab
)
14 - 18