Step 1; Step 2 - RightAngle R-Style T-Base Table Assembly Instructions

Step 1

• Lay the beam on a protective surface with the
insert channels facing up.
• Place one of the leg assemblies over the main
beam sliding the insert into the hollow leg
assembly. The leg assemblies are interchangeable.
• Insert the screws into the leg and fully tighten.
Do this to both legs.
E G

Step 2

• Set the left and right hinges on the main beam.
• Attach four screws through the hinges and into the
main beam.
A C
K&A Manufacturing • 800.298.4351 • www.raproducts.com/install
E
M
E
H
E
J
L
E
E
K
3 of 4