Table of Contents
Advertisement
Available languages
Available languages
2610047964.qxp_GTA47W 11/15/19 9:11 AM Page 10
Periodically check that all fasteners are
attached and adjusted according to the
assembly instructions included in this
manual.
Service
recommend that all tool service be
performed by a Bosch Factory Service
Center or Authorized Bosch Service
Station.
Maintenance
NO USER SERVICE -
ABLE
PARTS.
We
-10-
Tool Lubrication
Your Bosch tool has been properly
lubricated and is ready for use.
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the GTA47W and is the answer not in the manual?
Questions and answers
I’ve had my Bosch GTA47W for a few years. It is great! Recently when trying to lower the blade the wheel turned but the blade did not go up or down. I want to fix it and **** looking for guidance.
The Bosch GTA47W is a support base for table saws, not the saw itself. It does not have blade adjustment features. If you are experiencing a blade adjustment issue, it is likely related to the saw mounted on the base, not the GTA47W. Check the saw's manual for blade adjustment instructions.
This answer is automatically generated
When I fold the table saw up, it is top heavy and tips forward. The stand does not seem to be long enough to balance the saw
To prevent your Bosch GTA47W table saw from tipping forward when folded, ensure that the stand is properly locked in place. When folding or unfolding, keep fingers clear of hinge points and follow these steps:
1. Slightly lift the stand by the handle bar.
2. Rotate the release lever down to clear the locking pins.
3. Pull up and push forward on the stand until it locks in the upright position.
4. When lowering, rotate the release lever and pull back slightly to disengage.
5. Use your foot to pull out the kick bar if needed.
6. Lower the stand carefully until it locks in position.
Always check that the stand is securely locked before moving or storing the table saw.
This answer is automatically generated