Equipment Disposal; Ce (European Community) - Olympus FlexoFORM User Manual

10-003591-01EN [Q7780031], Rev. 4, January 2020
• Keep this instruction manual in a safe place for further reference.
• Follow the installation and operation procedures.
• It is imperative to respect the safety warnings on the instrument and in this
instruction manual.
• If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment could be impaired.
• Do not install substitute parts or perform any unauthorized modification to the
instrument.
• Service instructions, when applicable, are for trained service personnel. To avoid
the risk of electric shock, do not perform any work on the instrument unless
qualified to do so. For any problem or question regarding this instrument, contact
Olympus or an authorized Olympus representative.
• Do not touch the connectors directly by hand. Otherwise, a malfunction or electric
shock may result.
• Do not allow metallic or foreign objects to enter the device through connectors or
any other openings. Otherwise, a malfunction or electric shock may result.
• Make sure no FlexoFORM scanner components (screws, straps, etc.) have come
loose or are lost in critical equipment being inspected. Thoroughly check your
inspection area before and after an inspection to prevent foreign-object debris
(FOD) that could potentially cause equipment damage, injury, or loss of life.

Equipment Disposal

Before disposing of the FlexoFORM scanner, check your local laws, rules, and
regulations, and follow them accordingly.

CE (European Community)

This device complies with the requirements of directive 2014/30/EU
concerning electromagnetic compatibility, directive 2014/35/EU
concerning low voltage, and directive 2011/65/EU concerning
restriction of hazardous substances (RoHS). The CE marking indicates
compliance with the above directives.
10 Important Information — Please Read Before Use