Table 14 Wedges For Small-Diameter Pipes - Olympus FlexoFORM User Manual

Table 13 Wedges for automated inspections (continued)
Part order
number
Q7500099 As above, but for 762 mm (30 in.) pipe OD
Q7500100 As above, but for 813 mm (32 in.) pipe OD
Q7500101 As above, but for 864 mm (34 in.) pipe OD
Q7500102 As above, but for 914 mm (36 in.) pipe OD
Q7500103 As above, but for 1067 mm (42 in.) pipe OD
Q7500104 As above, but for 1219 mm (48 in.) pipe OD
Q7500105 As above, but for flat surfaces

Table 14 Wedges for small-diameter pipes

Part order
number
Q7500106 Standard wedge for flexible array probe (FA1) for manual
inspection of small pipes or elbow extrados. (Not suitable
for inspection of elbow intrados.) The wedge is used to
generate 0° Longitudinal waves and features a curvature
matching 33.4 mm (1.315 in.) outside diameter (OD) for
inspection of elbow extrados. The wedge also features an
11 mm high water column allowing inspection of up to
35 mm thick carbon steel materials. Compatible with the
Mini-Wheel encoder. Not compatible with FlexoFORM
scanner.
Q7500107 As above, but for 42 mm (1.66 in.) pipe OD
Q7500108 As above, but for 48 mm (1.9 in.) pipe OD
Q7500109 As above, but for 60 mm (2.375 in.) pipe OD
Q7500110 As above, but for 73 mm (2.875 in.) pipe OD
Q7500111 As above, but for 89 mm (3.5 in.) pipe OD
Q7500112 As above, but for 101.6 mm (4 in.) pipe OD
10-003591-01EN [Q7780031], Rev. 4, January 2020
Description
Description
Spare Parts and Accessories
Marketing number
SFA1-Auto-OD30
SFA1-Auto-OD32
SFA1-Auto-OD34
SFA1-Auto-OD36
SFA1-Auto-OD42
SFA1-Auto-OD48
SFA1-Auto-Flat
Marketing number
SFA1-Small-OD1.3
SFA1-Small-OD1.66
SFA1-Small-OD1.9
SFA1-Small-OD2.375
SFA1-Small-OD2.875
SFA1-Small-OD3.5
SFA1-Small-OD4
73