Instrument Compatibility; Safety Symbols; Table 2 Ancillary Equipment - Olympus HST-Lite User Manual

DMTA-20045-01EN, Rev. A, October 2012

Instrument Compatibility

The HST-Lite Scanner is compatible with the ancillary Olympus equipment listed in
Table 2 on page 4. For a list of other compatible parts and accessories, refer to chapter
2 on page 29.
Using incompatible equipment could cause malfunction and/or equipment damage.
Equipment
OmniScan MX
TomoScan FOCUS LT
OmniScan MXU
OmniScan MX2
TOFD wedges

Safety Symbols

The following safety symbols might appear on the instrument and in the instruction
manual:
General warning symbol:
This symbol is used to alert the user to potential hazards. All safety messages that
follow this symbol shall be obeyed to avoid possible harm.
4 Important Information — Please Read Before Use

Table 2 Ancillary equipment

Phased array instrument
Phased array instrument (using the optional
C1-DE15F-BXM-0.30M [U8767107] encoder adaptor)
OmniScan software
Phased array instrument (using the adaptor
OMNI-A2-ADP20 [U8775201] supplied with the
instrument)
ST1 and ST2 type
Description