Instrument Compatibility; Table 2 Ancillary Equipment - Olympus ChainSCANNER User Manual

DMTA069-01EN, Rev. D, March 2017
IMPORTANT
The images in this manual may not be identical to your instrument model and
connector type. However, the operating principles remain the same.

Instrument Compatibility

The ChainSCANNER is compatible with the Olympus ancillary equipment listed in
Table 2 on page 4.
Marketing number
OMNI-A2-ADP20
OMNI-A-ADP27
C1-LF-BXM-0.3M
C1-DE15F-BXM-0.30M
OmniScan PA or FOCUS LT
a. Encoder cable adaptor may be required (see Table 8 on page 68).
4 Important Information — Please Read Before Use

Table 2 Ancillary equipment

Part number
U8775201
U8780329
U8769010
U8767107
—
Description
Scanner interface adaptor to connect
scanners encoder cables with DE-15
connector to OmniScan MX2 with LEMO
connector scanner interface.
Scanner interface adaptor to connect
scanners encoder cables with LEMO
connector to OmniScan MX with DE-15
connector scanner interface.
0.3 m long adaptor LEMO female to
Bendix male linking LEMO encoder cable
to TomoScan FOCUS LT.
0.3 m long adaptor DE-15 female to
Bendix male linking DE-15 encoder cable
to FOCUS LT.
Many OmniScan and FOCUS LT
instrument models can be used.
a