DMTA020-01EN, Rev. D, September 2016
IMPORTANT
Some of the details of components and/or software images in this manual may differ
from your instrument's components or software display. However, the principles
remain the same.
Instrument Compatibility
The HST-X04 scanner is compatible with the Olympus ancillary equipment listed in
Table 2 on page 4.
Always use equipment and accessories that meet Olympus specifications. Using
incompatible equipment could cause equipment malfunction and/or damage, or
human injury.
Part number
U8120006
U8120038
U8775119
U8775085
U8775295
4
Important Information — Please Read Before Use
CAUTION
Table 2 Ancillary equipment
5682 preamplifier and 9 V battery.
preamplifier, one 2.5 m UT probe cable (LEMO 00
to LEMO 00), one 2.5 m power supply cable
linking to the OmniScan, and a belt case.
One 5 m power supply cable linking to the
OmniScan.
Scanner with a 150 mm frame, and a
supplementary 250 mm frame for wider probe
center separation.
OmniScan Mini-Wheel encoder LEMO – 2.5 m
Description