Olympus FlexoFORM User Manual page 62

10-003591-01EN [Q7780031], Rev. 4, January 2020
To change the cable sleeve
1. Carefully remove the two wheels on the sleeve side according to the procedure
detailed in "Changing a Magnetic Wheel" on page 46. Be aware of magnetic
forces that can suddenly attract or repulse parts.
2. Remove the screws that hold the scanner end piece, and pull it away.
3. Remove the screws on the bracket and pull the sleeve out of the end piece.
4. Follow the steps in reverse order to reinstall the (new) sleeve, and securely tighten
all screws.
54 Chapter 5