Advertisement
8.0 TROUBLESHOOTING
HEATING ELEMENTS DO NOT COME ON:
1. Power supply not "ON".
2. Pan not in down position.
3. Defective thermostat or elements.
4. Defective limit switch or activator mechanism.
5. Defective contactors.
PAN WILL NOT OPERATE (UP OR DOWN):
1. Power supply not "ON".
2. Motor has overheated and thermal overload has shut down motor. Wait 15 to 20
minutes and try again.
The gear reducer is sealed and permanently lubricated with a high grade synthetic
grease.
IMPORTANT NOTICE:
Your skillet is equipped with a thermally protected motor which raises and lowers the
pan. Continuous operation of 8 or more cycles may cause the motor to overheat and
shut down. Should this occur wait approximately 15 to 20 minutes for motor to cool.
Motor should then be ready for operation. To avoid this occurring DO NOT run motor
continuously for more than a few cycles.
16
Advertisement
