Front Wheel Removal And Reassembly; Front Wheel Removal; Front Wheel Reassembly; Rear Wheel Removal And Reassembly - Suzuki RM 250 2003 Owner's Service Manual

FRONT WHEEL REMOVAL AND
REASSEMBLY

FRONT WHEEL REMOVAL

• Loosen the axle shaft holder bolts 1.
• Remove the axle nut 2.
• Loosen the axle shaft holder bolts 3.
• Place the motorcycle on a block to lift front wheel off the
ground.
• Remove the axle 4.
• Remove the front wheel.

FRONT WHEEL REASSEMBLY

• Reassemble the spacer, front wheel and axle shaft.
• Tighten the axle nut to the specified torque with the special
tool.
! 09940-34581: Attachment F
" Axle nut: 35 N·m (3.5 kgf-m, 25.5 lb-ft)
• Fit the axle holder and tighten the bolts temporarily.
• Remove the block from under the chassis tube and move the
front fork up and down several times.
• Tighten the axle holder bolts to the specified torque.
" Axle holder bolt: 18 N·m (1.8 kgf-m, 13.0 lb-ft)
REAR WHEEL REMOVAL AND
REASSEMBLY

REAR WHEEL REMOVAL

• Remove the axle nut 1.
• Loosen the chain adjuster lock nuts 2 and chain adjusters 3.
• Place the motorcycle on a block to lift the rear wheel off the
ground.
• Remove the axle.
• Remove the rear wheel.
FRONT AND REAR WHEELS 13-3