Inspection After Installation - Suzuki RM 250 2003 Owner's Service Manual

8-14 TRANSMISSION AND CRANKSHAFT
• Install the gearshift cam driven gear.
• Apply THREAD LOCK SUPER and tighten the retainer
screws 3 to the specified torque.
& 99000-32030: THREAD LOCK SUPER "1303"
$ Retainer screw: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Install the gearshift shaft 4. Match the center teeth of the
gear on the gearshift shaft with the center teeth on the cam
driven gear as shown.

INSPECTION AFTER INSTALLATION

After mounting the engine, inspect the followings.
• Transmission oil level (!2-9)
• Engine coolant level (!2-11)
• Clutch cable play (!2-13)
• Throttle cable play (!2-13)
• Drive chain slack (!2-16)
• Brake pedal height (!2-20)
• Wire, cable and hose routing (!19-12 to 15)