Reach Bee7 User Manual page 9

REACH Bee7
l
User Manual
Table 2-2 Rear panel port description
No. Name
1 Power switch
2 PWR
3 DVI IN 1
4 DVI IN 2
5 DVI IN 3
6 VGA LOOP
7 RS 232/RS 485
8 RS 232
9 RS 485/RS 422
10 RS 485
11 LINE IN
12 MIC IN
13 LINE IN
14 LINE OUT
15 MIC IN
F i gu r e 2 - 2
Description
Switches on or off the power supply of Bee 7.
Indicates a power interface, used to connect to the power
adapter.
Indicates a video input interface, used to connect to a
camera.
Indicates a video input interface, used to connect to a
camera.
Indicates a VGA input interface, used to connect to a PC.
Indicates a loop output interface, used to loop out analog
VGA signals input from the DVI IN 3 interface.
Indicates a switch to select the camera control interface.
Indicates a camera control interface, used to connect to a
camera.
Connects to a desktop control panel.
Indicates a camera control interface, used to connect to a
camera.
Inputs stereo signals.
Inputs unbalanced microphone signals.
Inputs stereo signals.
Loops out audio signals input from the 3.5mm TRS
interface (LINE IN 11 and 13).
Inputs balanced microphone signals.
All Rights Reserved © SZ REACH TECH CO., LTD. 9