Reach Bee7 User Manual page 15

REACH Bee7
l
User Manual
Click to select a camera control protocol file (in .ini format) from the local
1
directory.
Click Open (O)
6.
Click Upload.
7.
Click Save and a dialog box "Save success!" is prompted.
8.
Click OK to complete the setting.
9.
Selecting a PTZ protocol
Click the drop-down list in PTZ protocol to select a protocol file.
1
Click Save.
2
Restart Bee 7 manually to validate the setting.
3
Deleting a PTZ protocol
Click the drop-down list in PTZ protocol to select a protocol file.
1
Click Delete and a dialog box "do you want to delete the protocol?" is prompted.
2
Click OK to delete the file and a dialog box "Success!" is prompted.
3
Click OK to complete the deletion.
4
3.2.3 Title/Logo
Click Title/Logo to open the parameter setting page, as shown in Figure 3-8.
All Rights Reserved © SZ REACH TECH CO., LTD. 15