Reach Bee7 User Manual page 10

REACH Bee7
l
User Manual
No. Name
16 LINE OUT
17 RESET
18 LAN
3. Bee 7 Configuration
Bee 7 Web interface is used in conjunction with Bee 7. You can log in to the Web
page to remotely set Bee 7 parameters.
3.1
Bee 7 Web Interface Login
Open the IE browser (IE8 or higher is required), enter the IP address of Bee 7 in the
address bar, and press Enter. The Bee 7 Web login interface is displayed as shown in
Figure 3-1.
Description
Loops out audio signals input from two channels MIC IN
interfaces (LINE OUT 12 and 15).
Indicates a reset key. It can be used to enter the backup
system and upgrade the master system in the situation
where the master system does not work well.
The system reset can be carried out when Bee 7 is
powered on. You can press RESET for at least 10
seconds, and then release the key. After Bee 7 is restarted,
enter the IP address displayed on the LCD screen to the IE
browser and then log in to the Web page of Bee 7.
Upgrade the system version in the System Upgrade page.
Connects to the network.
All Rights Reserved © SZ REACH TECH CO., LTD. 10