Reach Bee7 User Manual page 22

REACH Bee7
l
User Manual
F i gu r e 5 - 1
5.1
Tool Bar
Device List: displays information about the device. You can open or close the Device
List window by clicking it.
Logs: displays the log information about the connected Bee 7 and management
platform, such as the operation type and operation status (success or failure). You can
open or close the Logs bar by clicking it.
Status: displays the status Information about the classroom, such as the classroom
name, recording status, and available disk space. You can open or close the Status bar
by clicking it.
Operations: displays the list of operations available. You can open or close the
Operations bar by clicking it.
Monitoring: monitors a maximum of nine pictures of Bee 7. You can open or close
the Monitoring bar by clicking it.
Warning list: displays warning information about Bee 7, such as no video signals.
You can open or close the Warning list bar by clicking it.
Add Device: adds a device by clicking it.
Remove Device: deletes a selected Bee 7 by clicking it.
Connect: connects a Bee 7 in the disconnected state by clicking it. After the
connection is established, double-click Room0 of the corresponding Bee 7 to open
and play the video file again.
Disconnect: disconnects a connected Bee 7 by clicking it.
Note: Connect and Disconnect are mutually exclusive. Only one of them can be
enabled at a time.
All Rights Reserved © SZ REACH TECH CO., LTD. 22