Reach Bee7 User Manual page 13

REACH Bee7
l
User Manual
Audio input:
After Bee 7 establishes the connection with an audio input device, the audio input
device can work properly only after LINE IN or MIC IN is ticked off in the Web
interface according to the interface connection type at the rear panel of Bee 7. If not,
the sound will not be output.
Tick off LINE IN or/and MIC IN according to the interface connection type, as
1
shown in Figure 3-5.
Click Save and a dialog box "Save success!" is prompted.
2
Click OK to complete the setting.
3
Signal model:
After Bee 7 is connected to input video signals from a certain interface, you need to
determine the signal format by ticking off High definition or Standard definition in
the Web interface. For example, if DVI IN 1 on the rear panel is connected to input
SD signals and DVI IN 2 is connected to input HD signals, to ensure that the
F i gu r e 3 - 4
F i gu r e 3 - 5
All Rights Reserved © SZ REACH TECH CO., LTD. 13